UV flatbed printer printing process

With the continuous development of modern science and technology,  a new type of printing - UV flat printer appeared to achieve the target that  can print on any material. But in order to make greater use of UV flatbed printer for your work, first of all to understand its production process.

Below, for you to analyze the whole process of  UV flatbed printing.

1, determine the image going to print, send high-resolution graphics into the computer, connect the UV flatbed printer.

2, before printing make the product positioning

A, put the product in a fixed good position.

B, set aside the appropriate space for easy operation and printing of product inputs and outputs.

C, prohibit the operation and use of UV flatbed printer in high temperature places, UV flat panel printer should be away from the strong direct sunlight.

D, prohibit the UV flatbed printer placed in a vibrant place.

3,UV flatbed printer cable connection

A, confirm the computer, the printer is in a shutdown state, and cut off the power.

B, according to the random distribution of teaching CD, drive CD, color control CD and other USB data cable, a power cord, a decoder connected with a computer or network interface.

C, check the voltage on the label on the back of the printer to confirm that the voltage required by the machine matches the socket voltage of the plug you plugged into.

D, confirm the above three steps are correct, then connect the power supply.

4, UV flatbed printer software settings

A, the driver installation: when purchase of the printer, with printer manufacturers will send software and RIP. You can also download the driver directly from website.

B, open the computer taskbar settings in the “printer”, the target printer corresponding to the driver set to “default printer”.

C, in the use of the application software, and then according to the specific needs of the printer" Attributes" to set up.

5, UV flatbed printer shutdown

A, before shutting down, should check and confirm that the UV flatbed printer is in the normal standby state.

B, if the ink light tips should promptly change the ink cartridges, UV flatbed printer in the implementation of other work should wait for the completion of the operation can only be shut down.

C, shut down, should turn off the UV flat panel printer power key to shut down, not to directly cut off the power, otherwise it will have serious consequences.

D, after shut down, apply the cloth to cover the printer, so as to avoid dust intrusion damage to the UV flatbed printer.